Using Injection
Cleaning Canister - Add to canister. Follow manufacturer's directions for
hook up and observe safe operating procedures. Note: Chemplex® Purge is specifically
designed for use in all injection cleaning devices, including Kent Moore, Carbon Clean,
Wynn's, OTC. etc.
Vacuum/Induction Cleaning - Attach service tool to can of Chemplex® Purge.
With can in upright position, connect hosing to an intake manifold vacuum source.
Start engine and open valve slowly. Set needle valve to allow complete evacuation of
can in approximately 8 to 10 minutes. Once can is completely emptied, shut off
engine and re-attach vacuum to original location. Allow 10 minutes for hot soak, and
drive 2-3 miles or run at fast idle to remove modest tailpipe smoke. Use only as
directed. Manufacturer's liability is limited to refund of purchase price of
product. |
Chemplex®
Valve & Injection Purge is the professional way to clean severely fouled injector and
intake systems. How? Valve & Injection Purge is most effective when
installed directly into the fuel injection rail using a pressurized injection cleaning
canister, or when injected directly into a vacuum line. these methods allow the
concentrated OEM formula to "hot soak" deposits that are resistant to regular
strength add-to-tank injector and valve cleaners. Both injector and intake deposits
affect driveability. Both need to be cleaned to restore "like new" power
and performance. Severe intake and injector deposits require professional cleaning.
"Add to tank" chemicals, even concentrates like Chemplex®
Fuel Injection Cleaner, simply will not deliver rapid deposit cleanup.
Professionally installed Chemplex® Valve & Injection
Purge is the answer.
Gasoline detergents, added to
fuel by most major oil companies to control fuel injector plugging, are known to cause
carbon deposits on the back side of the engine's intake valves. Very slight amounts
of this carbon build up - less than a gram - will cause serious driveability problems.
And this amount of carbon can accumulate in just 5,000 miles of normal
driving. Additionally, alcohol additives, very commonly found in today's winter
blends (ethanol, methanol, etc.), are also known to encourage valve deposit
formation. Added to this is the questionable effectiveness of the fuel injection
deposit control additives themselves. Gasoline, even at the high priced premium
pump, contains high levels of resins, varnish, gums, olefins and other substances that
cause the formation of power-robbing deposits in the metering, control and injection units
of the fuel system. The combined effects of intake valve deposits (IVD) and port
fuel injection deposits result in serious driveability problems. Chemplex®
Valve & Injection Purge is the professional way to clean severely fouled injector and
intake systems without costly disassembly.
| The Chemplex Purge Service is an
excellent way to restore power and performance to high-mileage heavy duty trucks. You won't believe the difference! |
| |
|
|
